Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Clutch on a Derbi Senda 50

Model: Derbi Senda 50cc
Part: Clutch

Video tutorial

In this brief guide, we will see the instructions that will allow us to dismantle and replace the clutch of the Derbi Senda 50 motorcycle. In this case, the clutch replacement operation is performed with the engine removed, as well as on a bench; therefore, unscrew the screws of the clutch cover, thus accessing the clutch and transmission group.

At this point, unscrew the screws of the clutch pack, removing it from the bell; replace all the discs, alternating the insertion of cork ones with metal ones. Assemble and refit the clutch, finally installing the outer cover.


Posted on 22 April 2026 by ScegliAuto


Related tutorials

Removing the Clutch Assembly from the Derbi Senda
Removing the Clutch Assembly from the Derbi Senda
Senda 50cc In today's tutorial video, follow the main steps to remove and replace the clutch discs of the Derbi Senda 50, as well as the Aprilia SX 50. First, u…
How to Replace the Clutch on a Derbi Senda 50?
How to Replace the Clutch on a Derbi Senda 50?
Senda 50cc To replace the clutch on a Derbi Senda 50, loosen the screws securing the clutch cover located on the right side of the bike: once the securing screw…
How to Replace the Clutch on a Derbi Senda 50?
How to Replace the Clutch on a Derbi Senda 50?
Senda 50cc To replace the clutch on a Derbi Senda 50, loosen the screws that secure the clutch cover located on the right side of the vehicle: once the securing…

Vespa Immobiliser: How to Transfer the Chip from the Old Key

In the case shown in the video, the new keys are not recognised by the ECU: the Vespa starts but does not run (thus the immobiliser is active). The solution shown in the video involves locating the immobiliser chip in the old key (the one recognised by the ECU). Open the cover on the key (only red master keys or some blue ones), remove the chip (which is a small black cylinder or rectangle), insert it into the new key in place of the new one, and try to start. Now the key will work. If the master key is red, it will definitely work. If it is blue, it might work: you need to cut the silicone; this is possible but a delicate operation. If it is a black clone key, then it is a system that does not work.

Watch the video!


by ScegliAuto

More videos