Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Derbi Gpr 125
Part: Engine

By unscrewing all the screws that secure the engine block of the Derbi GPR 125 within its housing, you can extract it from the centre of the frame. Once the engine has been removed, proceed to unscrew the screws that secure the clutch cover, which must be extracted from its seat by removing the fastening screws. When the clutch has been removed, you can then remove the screws securing the semi-cover of the engine from the opposite side, taking it off and accessing the components inside. This way, you can remove the piston, crankshaft, and all the parts that need replacing.

Posted on 6 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you disassemble the engine of the Derbi GPR 125?
How do you disassemble the engine of the Derbi GPR 125?
Gpr 125 To disassemble the engine of the Derbi GPR 125, you will need to loosen the screws that fix the engine block to its housing in the center of the fram…
How to Remove the Engine from the Derbi GPR 125?
How to Remove the Engine from the Derbi GPR 125?
Gpr 125 To remove the engine from the Derbi GPR 125, loosen the bolts that secure the engine block within its housing. Once it is freed from the bolts and th…
How do you disassemble the engine of the Derbi GPR 125?
How do you disassemble the engine of the Derbi GPR 125?
Gpr 125 The disassembly of the Derbi GPR 125 engine can be done by loosening all the screws that fix the piece inside its housing, so that it can be removed.…

How to Replace the Battery of the Kymco Agility 125?

To replace the battery of the Kymco Agility 125, lift the seat to access the compartment underneath. At the rear of the under-seat compartment, you will find the battery under the corresponding panel. By unscrewing the screws that secure the panel, you can access the battery underneath, which must be freed from the corresponding securing screws and the appropriate power cables. Once the device is free, insert the new one, connecting and securing it properly, and cover everything with the panel.

Watch the video!


by ScegliAuto

More videos