Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Instructions for Dismantling the Sprocket and Pinion on a Derbi Terra 125

Model: Derbi Terra 125

This video is currently unavailable

In this video tutorial, you will see how to dismantle the sprocket and pinion on a Derbi Terra 125, following these simple instructions. First, remove the timing chain by taking out the clip with something sharp; then open the pinion cover by unscrewing the securing screws, and remove the timing chain and the pinion.

At this point, dismantle the central axle of the wheel and unscrew the securing screws of the sprocket; once removed, replace it with the new one, along with the pinion. All that’s left is to reassemble everything by applying the reverse procedure!


Updated on 4 April 2026 by ScegliAuto


Related tutorials

Instructions for Removing the Chain, Sprocket, and Gear on a Derbi Terra 125
Terra 125 In today's video tutorial, you will find instructions for removing and replacing the chain, sprocket, and gear on a Derbi Terra 125. First, remove th…
How to Replace the Air Filter on a Derbi Terra 125?
How to Replace the Air Filter on a Derbi Terra 125?
Terra 125 To replace the air filter on the Derbi Terra 125, loosen the screws securing the side cover panel of the bike, located near the seat: once the screws…
How to Replace the Exhaust on a Derbi Terra 125?
How to Replace the Exhaust on a Derbi Terra 125?
Terra 125 You can replace the exhaust on a Derbi Terra 125 by loosening the screws that secure the exhaust end can to its housing, located near the rear mudgua…

How to replace the air filter on a Sym VF3I?

To replace the air filter on a Sym VF3I, open the underseat compartment to access the screws and disconnect the battery connectors. The battery will then need to be removed from its housing, allowing access to the components underneath. Here, you will find the filter box cover, which should be removed by unscrewing the fastening screws. Once the old filter is removed, insert the new one into its place and secure the cover with the screws. Then, reinstall the battery and close the underseat compartment.

Watch the video!


by ScegliAuto

More videos