|
Do it yourself
| |||
| ||||
|
Model: Derbi Senda 125
To replace the water pump on the Derbi Senda, first disconnect the coolant hose and collect it in a container. Then remove the oil pump by sliding it out as shown in the video. Next, loosen the bolt that secures the brake pedal and drain the gearbox oil by opening the drain plug. At this point, you can loosen the bolts that secure the water pump and remove it from its housing by tapping it gently with a mallet. Once the old pump is removed, you can replace it with a new spare part.
Updated on 22 April 2026 by ScegliAuto
Video tutorial
Related tutorials
Senda 125
This guide provides the main instructions for disassembling and replacing the water pump on the Derbi Senda 125, as well as the 50. First, place your…
Senda 125
In this video, you will see how to replace the radiator fluid on a Derbi Senda or DRD, following the instructions below. First, remove the seat by ta…
Senda 125
To replace the clutch on a Derbi Senda 125, disconnect the pipes connected to the casing located at the lower right side of the bike. Once the pipes …
|
How to Replace the Battery in a Yamaha Vino 125 Scooter?
In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.006
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
