|
Do it yourself
| |||
| ||||
|
Model: Derbi Terra 125
To replace the water pump on the Derbi Terra, locate the part at the bottom of the bike, immediately behind the front wheel and under the curved section of the exhaust pipe. To replace the part, you will need to loosen the bolts that secure it and disconnect the fluid passage hoses. Once the part is freed, you can extract it from its housing and replace it with a new spare part. This should be properly secured with screws and connected.
Updated on 19 May 2026 by ScegliAuto
Video tutorial
Related tutorials
Terra 125
In order to replace the water pump of the Derbi Terra 125, you need to loosen the screws that hold the pump protection panel, located on the right si…
Terra 125
To replace the air filter on the Derbi Terra 125, loosen the screws securing the side cover panel of the bike, located near the seat: once the screws…
Terra 125
You can replace the exhaust on a Derbi Terra 125 by loosening the screws that secure the exhaust end can to its housing, located near the rear mudgua…
|
How to Replace the Battery in a Yamaha Vino 125 Scooter?
In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.006
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
