Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Headlight replacement on Dodge Journey

Model: Dodge Journey MK 1 - Years 2008-2020
Part: Headlight

Is the Journey's headlight broken? Let's see how the dedicated compartment is disassembled from inside. Let's lift the front hood, let's put it in safety. With a cordless screwdriver we unscrew the locking pins located in the upper part of the bumper. Once you have unscrewed the screws in the upper part, unscrew the pins of the stone guards and finally remove the pins located in the lower part of the bumper. We remove the bumper. We unscrew the screws of the headlight and remove it from the car body. We assemble the new headlight with the new bulbs if damaged and (always suitable type and size) we insert the headlight in its housing. We mount the bumper on the front of the Journey.

Posted on 30 July 2020 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Fan Resistor on a Dodge Journey
How to Replace the Fan Resistor on a Dodge Journey
Dodge Journey (2008-2020 / MK 1) How to replace the fan resistor on a Dodge Journey? In this video, see how to carry out the removal. Use a lever to remove the plastic cover under th…
Battery Replacement on a Dodge Journey
Battery Replacement on a Dodge Journey
Dodge Journey (2008-2020 / MK 1) How to remove the battery from a Dodge Journey. Pay close attention to the process. In this vehicle, the battery is not located in the engine bay but…
How to Replace the Timing Belt on a Dodge Journey
How to Replace the Timing Belt on a Dodge Journey
Dodge Journey (2008-2020 / MK 1) How to replace the timing belt on a Dodge Journey? Lift the car on a column lift (if necessary, remove the front wheel and the right wheel arch liner…

Other guides you may be interested in

How to Remove the Driver's Side Airbag (Steering Wheel) on a BMW 3 Series

How to remove the driver's side airbag (steering wheel) on a BMW 3 Series? This operation is very simple if you follow the steps. Let's see in this guide how to proceed: insert a medium-length screwdriver into the rear slots on the steering wheel and turn until you release the clips that hold the airbag. Once the airbag is disconnected, disconnect the power connectors and remove it from the steering wheel. For reinstalling the airbag: connect the power connector, then press it onto the steering wheel until the locking clips snap into place inside the steering wheel.

Watch the video!


by ScegliAuto

More videos