Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Fan Resistor on a Dodge Journey

Model: Dodge Journey MK 1 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Blower motor

Video tutorial

How to replace the fan resistor on a Dodge Journey? In this video, see how to carry out the removal. Use a lever to remove the plastic cover under the front windscreen, and with a screwdriver, undo the cover where the resistor is located.

Disconnect the large connector of the resistor, then extract it from its housing. Insert a new fan resistor (connect the power connector).

Finally, reattach the cover. Check the correct installation of the previously fitted parts and test the correct operation of the fan.


Updated on 11 March 2026 by ScegliAuto


Related tutorials

How to Remove the Radiator Fan on a Dodge Journey 3.6 V6
How to Remove the Radiator Fan on a Dodge Journey 3.6 V6
Dodge Journey (2008-2020 / MK 1) Today we will see the main instructions for dismantling and replacing the radiator fan on a Dodge Journey 3.6 V6 VVT. First, open the bonnet of the v…
Removing the Cabin Fan Motor on a Dodge Journey - Fiat Freemont
Removing the Cabin Fan Motor on a Dodge Journey - Fiat Freemont
Dodge Journey (2008-2020 / MK 1) In this video tutorial, you will see the main instructions on how to remove the cabin fan motor of a Dodge Journey and a Fiat Freemont, following the…
Where is the fuse box of the Dodge Journey located?
Where is the fuse box of the Dodge Journey located?
Dodge Journey (2008-2020 / MK 1) If you are looking for the box containing all the fuses for your Dodge Journey, you just need to follow all the steps described in the following guid…

How to Set the Clock on a Renault Master 3

This guide shows you how to set a new time on a Renault Master 3. Start by turning on the instrument cluster of the vehicle without starting the engine. Next, using the end of the right-hand steering column stalk, scroll through the options on the display until you reach 'set time', then press the down arrow button to make the displayed time blink. Once this is done, press and hold the down arrow button to change the hour, which you can adjust using the two arrow buttons at the end of the stalk. Once the correct hour is set, press and hold the down arrow button again to move to the minutes. After setting the correct time, restart the vehicle.

Watch the video!


by ScegliAuto

More videos