Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Radiator Fan on a Dodge Journey 3.6 V6

Model: Dodge Journey MK 1 - Years 2008-2020

Today we will see the main instructions for dismantling and replacing the radiator fan on a Dodge Journey 3.6 V6 VVT. First, open the bonnet of the vehicle and start removing the air filter box by unscrewing the fixing screws found on the sides and disconnecting the intake hose; then also remove the coolant reservoir, as illustrated in the video. At this point, unscrew the fan screws from the radiator and disconnect the electrical connector to remove it, replacing it with the new one!

Updated on 4 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Heater Radiator on a Dodge Journey?
How to Replace the Heater Radiator on a Dodge Journey?
Dodge Journey (2008-2020 / MK 1) To replace the heater radiator on a Dodge Journey, you need to completely detach the carpet and the side panel of the footwell corresponding to the d…
How to Replace the Fan Resistor on a Dodge Journey
How to Replace the Fan Resistor on a Dodge Journey
Dodge Journey (2008-2020 / MK 1) How to replace the fan resistor on a Dodge Journey? In this video, see how to carry out the removal. Use a lever to remove the plastic cover under th…
Removing the Cabin Fan Motor on a Dodge Journey - Fiat Freemont
Removing the Cabin Fan Motor on a Dodge Journey - Fiat Freemont
Dodge Journey (2008-2020 / MK 1) In this video tutorial, you will see the main instructions on how to remove the cabin fan motor of a Dodge Journey and a Fiat Freemont, following the…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos