Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the fuse box of the Dodge Journey located?

Model: Dodge Journey MK 1 - Years 2008-2020
Part: Fuse box

Thanks to the procedure described in our new guide dedicated to all of you who own a Dodge Journey, you will be able to find the box containing all the various fuses of the car in just a few minutes. First of all, make sure that your Dodge Journey is turned off, then open the front hood and focus your attention on the right side of the engine compartment. At this point, locate the fuse box and remove its cover to finally access the fuses you were looking for. For more information on their numbering, you can consult the car's specific manual.

Posted on 26 November 2024 by ScegliAuto

Video tutorial

Related tutorials

Where is the fuse box of the Dodge Journey located?
Where is the fuse box of the Dodge Journey located?
Dodge Journey (2008-2020 / MK 1) If you are looking for the box containing all the fuses for your Dodge Journey, you just need to follow all the steps described in the following guid…
Where is the engine fuse box of the Dodge Journey located?
Where is the engine fuse box of the Dodge Journey located?
Dodge Journey (2008-2020 / MK 1) To easily and safely find the fuse box of the engine of your Dodge Journey, you just need to read the steps described in our new guide and apply them…
How to reset the radio in the Dodge Journey?
How to reset the radio in the Dodge Journey?
Dodge Journey (2008-2020 / MK 1) To reset the radio in the Dodge Journey, you need to go inside the cabin to locate the fuse box: it is positioned directly beneath the glove compartm…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos