Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the license plate light bulb on the Dodge Journey?

Model: Dodge Journey MK 1 - Years 2008-2020
Part: License plate light

In order to replace the license plate light bulb of the Dodge Journey, you need to lift the tailgate and then use a screwdriver to pry off the light fixture located above the license plate. Once it has been removed from its housing, you can disconnect the connector and remove the corresponding bulb as well. The new replacement bulb should then be connected to the appropriate connector and inserted into the light fixture. This way, you need to secure the fixture in its place, checking that everything is functioning properly.

Posted on 15 September 2023 by ScegliAuto

Video tutorial

Related tutorials

How to replace the front fog light bulb of the Dodge Journey
How to replace the front fog light bulb of the Dodge Journey
Dodge Journey (2008-2020 / MK 1) In this short and simple guide, we will see how to disassemble and replace the front fog light bulb of the Dodge Journey. First, lift the vehicle and…
Where is the fuse box of the Dodge Journey located?
Where is the fuse box of the Dodge Journey located?
Dodge Journey (2008-2020 / MK 1) Thanks to the procedure described in our new guide dedicated to all of you who own a Dodge Journey, you will be able to find the box containing all t…
Where is the fuse box of the Dodge Journey located?
Where is the fuse box of the Dodge Journey located?
Dodge Journey (2008-2020 / MK 1) If you are looking for the box containing all the fuses for your Dodge Journey, you just need to follow all the steps described in the following guid…

Other guides you may be interested in

How to Remove the Headlight Bulbs on a Toyota Rav4

Let's see how to remove the headlight bulbs on a Toyota Rav4. Open the bonnet by pulling the lever located at the bottom right of the dashboard and secure it. Locate the inspection cap (if present) on the headlight and remove it (located at the rear of the headlight). At this point, you will find the bulbs with metal clips; pull the bulb holders out of the headlight and extract the damaged bulb using a screwdriver and pliers. Fit the new bulb (ensuring it is the correct type and size), insert the bulb holder back into the headlight housing, and close the headlight with the inspection cap. Test the lights to ensure they are functioning correctly.

Watch the video!


by ScegliAuto

More videos