Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the front fog light bulb of the Dodge Journey

Model: Dodge Journey MK 1 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Fog lights

Video tutorial

In this short and simple guide, we will see how to disassemble and replace the front fog light bulb of the Dodge Journey. First, lift the vehicle and start removing the plastic clips located under the plastic cover of the bumper, in order to remove it; then disconnect the electrical connector of the fog light bulb, unscrew the screws of the headlight to detach and remove it, as shown in the video.

At this point, remove and replace the bulb with the new one, of the right type and with the same attachment; reassemble the fog light and the plastic cover!


Posted on 2 March 2025 by ScegliAuto


Related tutorials

How to Replace the Fog Light on a Dodge Journey?
How to Replace the Fog Light on a Dodge Journey?
Dodge Journey (2008-2020 / MK 1) To replace the fog light on a Dodge Journey, use a tool to pry off the cover surrounding the corresponding light. Once this cover is removed, you can…
Replacing Headlight Bulb on Dodge Journey
Replacing Headlight Bulb on Dodge Journey
Dodge Journey (2008-2020 / MK 1) Are the rear headlight bulbs on the Dodge Journey blown? Let's replace the headlight bulbs. Open the rear hatch. Unscrew the retaining screws of the …
How to Replace the Fog Light on a Dodge Journey
How to Replace the Fog Light on a Dodge Journey
Dodge Journey (2008-2020 / MK 1) Replace the broken fog light on a Dodge Journey. Remove the bumper if necessary for disassembly. Take off the cover located in the plastic wheel arch…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos