Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Dodge
    3. :
  3. Charger
    4. : To reset the uconnect system of the Dodge Charger.

Dodge Charger - Video tutorial

Model: Dodge Charger LD - Years 2011-2023
Part: Car stereo
Operation: To reset the uconnect system of the Dodge Charger.

To reset the uconnect system of the Dodge, we start by turning on the car's instrument panel, and if the infotainment system is off, we turn it on. Once the infotainment system is on, we press and hold the power button and the radio frequency adjustment button simultaneously for 10 seconds until the "dodge" message appears and disappears. Once the infotainment system turns off after a few seconds, it will automatically turn back on, and we can use it again as if it just came out of the factory (if necessary, the radio code should be entered as well).


Posted on 1 November 2023 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos