Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Add Antifreeze to the Radiator

Model: Dodge Charger LX - Years 2006-2011
Part: Antifreeze coolant

With the arrival of winter and nighttime frosts, your car requires extra attention to ensure it maintains efficient performance throughout the year. One essential task is to fill the radiator with antifreeze. This prevents the liquid in the radiator from freezing. After purchasing the antifreeze product, open the bonnet and locate the radiator reservoir. Each reservoir has a pipe at the bottom that needs to be detached by pulling gently. At this point, you will see all the water that was in the radiator and reservoir drain out. After emptying both tanks and disposing of the spilled liquid, you can take the antifreeze and begin pouring it into the radiator after reconnecting the rubber pipe.

Updated on 22 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Drain the Coolant from Your Vehicle
How to Drain the Coolant from Your Vehicle
Dodge Charger (2006-2011 / LX) In this video, you will learn how to drain the coolant from your vehicle. First, take a container and slide it under your car, specifically under the…
Replacing the Coolant Reservoir
Replacing the Coolant Reservoir
Dodge Charger (2006-2011 / LX) To replace the coolant reservoir, first drain the system by disconnecting the drainage hose located at the bottom of the radiator (blowing a bit of a…
Radiator Fan Removal Instructions
Radiator Fan Removal Instructions
Dodge Charger (2006-2011 / LX) The cooling fans are mounted on a support frame located just behind the radiator and secured with two upper side pins, while the lower part has plast…

How to Remove the Rear Bumper of an Opel Corsa

How to remove the rear bumper of an Opel Corsa? Follow these steps carefully. This operation is not too complex if done in order. First, use a screwdriver or battery-powered drill to unscrew the securing screws located near the rear lights, then remove them from the body along with their connectors. Unscrew the screws located at the top of the bumper, then unscrew the screws on the sides of the wheel arch liners and at the bottom of the bumper. Once the bumper is free from any screws or pins, grasp it with your hands and pull it away from the body (disconnect any power cables if necessary).

Watch the video!


by ScegliAuto

More videos