Do it yourself
Frequently asked questions about cars and motorcycles

How to mount the Android screen on a Citroen DS4

Model: DS DS 4 MK 1 - Years 2011-2018
Part: Car stereo

In this video, we see how to install an Android radio on a Citroen DS4: we start by removing the ventilation grilles, which come off using a hook as shown by the YouTuber. With a plastic spatula, we remove the partition covering the EOBD socket, then remove all the visible screws around the radio and air conditioning unit, and this will come off by pulling it towards us. We will need to remove all the electrical connectors, the antenna, and the GPS. Now we remove the old screen and the net from the air conditioning dashboard, which must be replaced with one suitable for accommodating the Android screen. On the market, there are dashboards for 9" and 10.1" screens. We can find them, for example, on fruugo. It is the code 307235837-688086660 at a price of 59.00 euros for the 10.1" + 18.99 for shipping. We move the electronics and buttons from one dashboard to the other, and then we place the screen in its position. We can install everything in the car, but first, we must remove the radio body that remained inside. Reconnect all the cables, tighten all the screws, put back the partition under the device, and then the ventilation grilles.

Posted on 19 November 2025 by ScegliAuto

Video tutorial

Related tutorials

DS DS 4 (2021-2026 / MK 2) In this video, we see an extremely innovative feature of the Citroen DS4. Like all Citroens, it can be very innovative, and on the higher-spec versio…
DS DS 4 (2011-2018 / MK 1) The procedure described is the standard method for a Citroen DS4 with a digital display and button on the dashboard. Get into the car: everything mus…
DS DS 4 (2021-2026 / MK 2) Let's see how to reset the tire pressure monitoring system on a Citroen DS4: let's sit in the driver's seat and turn on the vehicle's electrical syst…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos