Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the water pump on a DS 7?

Model: DS DS 7 MK 1 - Years 2020-2026
Part: Pump

To replace the water pump of the DS 7, you will need to lift the car so that the front right wheel is off the ground. This wheel will then need to be removed along with the wheel arch and the lower bumper trim panel. By doing this, you will be able to locate the side of the engine where the water pump is located. At this point, you will need to remove the corresponding pulley and disconnect the hoses connected to the pump. The old pump can now be completely removed so that the new one can be installed and everything can be checked to ensure it functions properly.

Posted on 2 January 2026 by ScegliAuto

Video tutorial

Related tutorials

What simple and quick remedies can be applied to DS cars?
DS DS 7 (2020-2026 / MK 1) The presentations shown in this video are dedicated to those who want to easily and inexpensively solve problems with their car, or make modification…
How to replace the cabin air filter of the DS 7
How to replace the cabin air filter of the DS 7
DS DS 7 (2020-2026 / MK 1) In this short guide, we will see the instructions that will allow us to disassemble and replace the cabin air filter or pollen filter of the DS 7. Fi…
How to replace the cabin air filter of the DS7
How to replace the cabin air filter of the DS7
DS DS 7 (2020-2026 / MK 1) If you own a DS7 and want to learn how to quickly and correctly replace the cabin air filter, all you have to do is carefully read the following guid…

Other guides you may be interested in

How to Replace the Rear Light and Bulbs on a Ford Focus Year 2000

To replace the rear light and bulbs on a Ford Focus 2000/2004, first, open the tailgate of the boot. This gives access to the screw that holds the rear light in place. The screw to undo (using an appropriate screwdriver) is located inside the light and corresponds to the fold that accommodates the tailgate (as shown in the images). Once you start to undo it, continue with the operation and then remove the nut from the inside of the bodywork. At this point, you can remove the light, being careful to disconnect the electrical supply by unplugging the connectors or removing the entire bulb holder from its housing. This way, you can replace the bulbs. To reassemble everything, simply follow the described operations in reverse order.

Watch the video!


by ScegliAuto

More videos