Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Air Filter in the DS 7?

Model: DS DS 7 MK 1 - Years 2020-2026
Part: Air filter

The air filter in the DS 7 is located in the same position as in other vehicles: it is found inside the engine compartment, contained in a specific box. To replace this component, first park the vehicle safely, open the engine compartment lid, and secure it with the appropriate safety rod. Now, using a screwdriver, unscrew the six screws holding the cover of the filter box, then lift it off and remove the filter element from inside the box. Insert the new filter and close it by tightening the screws.

Posted on 18 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the cabin air filter of the DS7
How to replace the cabin air filter of the DS7
DS DS 7 (2020-2026 / MK 1) If you own a DS7 and want to learn how to quickly and correctly replace the cabin air filter, all you have to do is carefully read the following guid…
How to replace the cabin air filter of the DS 7
How to replace the cabin air filter of the DS 7
DS DS 7 (2020-2026 / MK 1) In this short guide, we will see the instructions that will allow us to disassemble and replace the cabin air filter or pollen filter of the DS 7. Fi…
How to change the cabin filter of the DS7
How to change the cabin filter of the DS7
DS DS 7 (2020-2026 / MK 1) In this video we can see where the cabin air filter of a DS7 is located and how to change it. It is a very simple operation: the drawer is located in…

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos