Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the wing mirror in the Citroen DS4?

Model: DS DS 4 MK 1 - Years 2011-2018
Part: Side mirror

In this tutorial we can see how to disassemble the outside rear view mirror in the Citroen DS4. In order to access the fastening screws, we will first have to disassemble the door panel. To do this, remove the opening handle frame, remove the support handle cover and unscrew the three screws underneath it. Subsequently, we unscrew the screws located inside the console of the window lifters, those located on the side and remove the clips present along the lower edge. After having removed the panel, we can disconnect the two connectors of the mirror and unscrew the relative bolt, located under the black sticker.

Posted on 8 March 2023 by ScegliAuto

Video tutorial

Related tutorials

How to replace the timing belt of the Citroen DS4 1.6 HDI.
How to replace the timing belt of the Citroen DS4 1.6 HDI.
DS DS 4 (2011-2018 / MK 1) Today's guide will show us the steps on how to dismantle and replace the timing belt of the Citroen DS4 1.6 HDI, following the instructions below. Fi…
How to remove the front door panel of the Citroen DS4
How to remove the front door panel of the Citroen DS4
DS DS 4 (2011-2018 / MK 1) The disassembly of the front door panel of the Citroen DS4 is very simple to carry out but care must be taken not to damage the edges of the plastic …
Where is the OBD port located on the Citroen DS4 2014?
Where is the OBD port located on the Citroen DS4 2014?
DS DS 4 (2011-2018 / MK 1) In this new guide, we will discover where the OBD port is located inside your 2014 Citroen DS4. First, park the car on a flat surface and turn it off…

Remove the Front Door Panel on Mercedes C

Remove the front door panel on Mercedes C to access the window switch assembly. Disconnect the battery terminals in the engine compartment. Use a screwdriver to remove the screws located in the upper lever opening area and the screws in the handle (after removing the plastic screw covers). Remove the trim near the lock, unscrew any remaining screws on the door panel, and detach the retaining clips. Finally, pull off the panel and disconnect it from the door (unplug the power harness and the opening cable). Unscrew or detach the retaining clips of the window switch assembly.

Watch the video!


by ScegliAuto

More videos