Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. DS
    3. :
  3. DS 4
    4. : How to remove the front door panel of the Citroen DS4

DS DS 4 - Video tutorial

Model: DS DS 4 MK 1 - Years 2011-2018
Part: Door panel
Operation: How to remove the front door panel of the Citroen DS4

The disassembly of the front door panel of the Citroen DS4 is very simple to carry out but care must be taken not to damage the edges of the plastic coverings during their removal; you will start by unhooking and removing the frame around the internal opening lava and then move on to the disassembly of the window lifts push-button panel; along the outer side edge there are three plugs that cover some panel fixing screws; finally remove the cover of the handle of the internal handle to access the last three fixing screws of the panel; now it will be enough to pry along the contour to release the panel.


Posted on 14 December 2023 by ScegliAuto



How to disassemble the wing mirror in the Citroen DS4?
DS DS 4 (2011-2018 / MK 1) In this tutorial we can see how to disassemble the outside rear view mirror in the Citroen DS4. In order to access the fastening screws, we will firs
How to replace the cabin filter on the Citroen DS4
DS DS 4 (2011-2018 / MK 1) To be able to replace the cabin air filter of your Citroen DS4, you just need to put the following steps into practice. The first thing to do is to p
How to replace the battery of the Citroen DS4 remote control?
DS DS 4 (2011-2018 / MK 1) In this tutorial, we can see how to replace the battery of the Citroen DS4 remote control, an extremely simple and quick operation. To do this, we wi

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos