Do it yourself
Frequently asked questions about cars and motorcycles

How to Perform a Forced Regeneration with the Delphi DS 150

Model: DS DS Various
Part: Checks and maintenance

Video tutorial

In this video, we will see how to perform a forced regeneration of the DPF on a vehicle using the Delphi DS 150. First, a few words about this special tool: it is a state-of-the-art diagnostic device, equipped with Bluetooth technology, highly professional and complete with very intuitive and easy-to-use software.

You can find the device on diagnositca-auto.com for £119.90. Once you have selected your vehicle, connect the component which will notify you that the connection has been established.

Choose the function using the button on the left menu. The system will immediately detect errors, including P0422 - maximum number of aborted regenerations: clear the other two errors, keeping only this one as it is the most important.

Go to the operational button with its crossed keys and select what you want to do, choosing: regeneration. Read the prerequisites: engine on, no stored errors, and proceed.

Carry out the forced regeneration and once completed, you can disconnect the component.


Updated on 24 September 2026 by ScegliAuto


Related tutorials

DS DS Various The vehicle we are addressing is a Citroen DS 4, specifically the series produced in 1974, thus classified as a historic vehicle. Being dated, it goe…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

How to Reset the Tyre Pressure Light on the Hyundai i20

These brief instructions will show you how to reset the tyre pressure monitoring system (TPMS) light on the Hyundai i20. Before performing the reset, ensure that all four tyres are at the correct operating pressure. Then, get inside the cabin and turn on the ignition. Now, press and hold the TPMS reset button located on the left side of the driver's seat until the tyre pressure light resets on the instrument panel, as shown in the video. At this point, turn off the ignition and start the engine to complete the process!

Watch the video!


by ScegliAuto

More videos