Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Wheel of the Ducati Panigale 959

Model: Ducati Panigale 959
Part: Wheel

Video tutorial

This guide will show you how to remove the rear wheel of the Ducati Panigale 959 motorcycle. First, place the motorcycle on a rear stand to lift the wheel off the ground; then use a ratchet with the appropriate socket to unscrew the central wheel nut, removing the central pin as shown in the video.

At this point, disconnect the chain and gently remove the rear wheel, replacing the tyre with a new one if necessary; reassemble the wheel and finally adjust it.


Updated on 20 October 2026 by ScegliAuto


Related tutorials

How to Replace the Air Filter on the Ducati Panigale 959
How to Replace the Air Filter on the Ducati Panigale 959
Panigale 959 Follow the main steps to remove and replace the air filter on the Ducati Panigale 959. First, place your motorcycle on a stand and remove the rider's…
How do you replace the headlight bulb of the Ducati Panigale 959?
How do you replace the headlight bulb of the Ducati Panigale 959?
Panigale 959 To replace the headlight bulb on the Ducati Panigale 959, you need to access the inside of the headlight assembly, from the space located immediately…
How do you disassemble the engine of the Ducati Panigale 959?
How do you disassemble the engine of the Ducati Panigale 959?
Panigale 959 In order to disassemble the engine of the Ducati Panigale 959, you have to loosen all the screws that fix it to its housing compartment: you will als…

How to Replace the Front Headlamp Bulb on a Harley-Davidson 883

In this tutorial, see how to replace the front headlamp bulb on a Harley-Davidson 883, a straightforward and quick operation. First, ensure the key is not inserted, then remove the outer ring of the headlamp by unscrewing the relevant bolt. Next, separate the headlamp from the base, disconnect the power connector, and remove the large rubber cap. At this point, release the metal clip, extract the old bulb, and insert the replacement, avoiding direct contact with the glass. To reassemble everything, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos