Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service on a Ducati 848 Streetfighter

Model: Ducati 848
Part: Instrument cluster

Video tutorial

This video shows how to reset the service light on a Ducati 848 Streetfighter using JPDiag with a free license. JPDiag is free software that allows you to diagnose your bike equipped with Magneti Marelli ECUs. You will need a 4-pin connector to connect to the OBD. The YouTuber then connected it to a laptop to scan various parameters using JPDiag software and reset the service.

Remember, the software is not immediately usable; it must be activated via an email sent at the first connection. Only after receiving their confirmation email can you start using the software.


Updated on 2 November 2026 by ScegliAuto


Related tutorials

How to reset the Service light on a Ducati 848?
How to reset the Service light on a Ducati 848?
848 To reset the Service light on a Ducati 848, connect a diagnostic tool to the vehicle's OBD port, located on the left side of the bike. Follow the tut…
How to Replace the Coolant in a Ducati 848
848 Today, we will guide you on how to bleed and top up the coolant in a Ducati 848, following the instructions below. First, place your motorcycle on a …
How to Replace the Air Filter on the Ducati 848
How to Replace the Air Filter on the Ducati 848
848 Follow this guide for the main steps to remove and replace the air filter of the Ducati 848 engine, using the instructions below. First, place your m…

How to replace the clutch lever on the Sherco SEF 300?

To replace the clutch lever on the Sherco SEF 300, you need to loosen the screws that secure the lever to its housing on the left side of the handlebars. Once these screws are loosened, you can unscrew the nut at the base of the lever to disconnect the clutch cable attached to the corresponding lever. Once the cable is detached, the lever can be removed from its housing and replaced with a new spare part; after installation, ensure that it functions correctly.

Watch the video!


by ScegliAuto

More videos