|
Do it yourself
| |||
| ||||
How to reset the Service light on a Ducati 848?
Model: Ducati 848
Video tutorial
To reset the Service light on a Ducati 848, connect a diagnostic tool to the vehicle's OBD port, located on the left side of the bike. Follow the tutorial to connect the additional cables. Once the scanner is connected, select the motorcycle model and its corresponding version; this will allow you to reset the light by clearing the errors in the ECU. After the procedure, disconnect the scanner and check that the light has been reset correctly.
Updated on 18 September 2026 by ScegliAuto
Related tutorials
848
In this guide we will see the main instructions that will allow us to drain and then top up the engine coolant of the Ducati 848. First of all, we pu…
848
The timing belt must be replaced regularly to ensure the engine operates correctly; follow these steps to remove and replace the timing belt on the D…
848
This tutorial shows how to replace the battery in the Ducati 848 EVO, a very simple and quick operation. Before proceeding, ensure that the key is no…
|
How to replace the clutch lever on the Sherco SEF 300?
To replace the clutch lever on the Sherco SEF 300, you need to loosen the screws that secure the lever to its housing on the left side of the handlebars. Once these screws are loosened, you can unscrew the nut at the base of the lever to disconnect the clutch cable attached to the corresponding lever. Once the cable is detached, the lever can be removed from its housing and replaced with a new spare part; after installation, ensure that it functions correctly. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.007
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
