Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the motor oil in the Ducati Monster 1200?

Model: Ducati Monster 1200
Part: Engine oil

This video is currently unavailable

In this tutorial, we can see how to replace the motor oil in the Ducati Monster 1200, an extremely simple and fast operation. First of all, make sure that the engine is cold enough, then place a container under the motorcycle, locate the drain plug and unscrew it using a 5mm hex key. Let all the oil in the system drain out, unscrew the old filter, tighten both the replacement filter and the drain plug.

At this point, all that's left to do is to pour the necessary amount of oil through the designated upper hole.


Posted on 5 May 2025 by ScegliAuto


Related tutorials

How to Change the Engine Oil and Oil Filter of the Ducati Monster 1200
How to Change the Engine Oil and Oil Filter of the Ducati Monster 1200
Monster 1200 Below are the main instructions that will allow you to perform the routine maintenance service by changing the engine oil and oil filter of the Ducat…
How to Change the Engine Oil of the Ducati Monster 1200 S
How to Change the Engine Oil of the Ducati Monster 1200 S
Monster 1200 This guide outlines the steps to replace the engine oil and oil filter of the Ducati Monster 1200 S, performing routine maintenance. First, remove th…
How to change the engine oil and oil filter on a Ducati Monster 1200
How to change the engine oil and oil filter on a Ducati Monster 1200
Monster 1200 In this guide, we will go through the steps to perform routine maintenance by changing the engine oil and oil filter on the Ducati Monster 1200. Firs…

An Affordable Modification to Solve a Problem on the Yamaha MT07

This video shows how to solve a problem affecting the Yamaha MT07 with a very affordable modification. This bike requires a specific movement of the throttle grip to accelerate, which forces the right wrist into an unnatural twist. You can remedy this by fitting the throttle control from the R6, which reduces the rotation from 90° to 45°; the cost is under £25 even when buying the original part directly from the dealership. As shown, the disassembly and reassembly work is extremely simple; just be careful not to let the throttle guide slip, as it has its seat directly in the cover. You can see the difference in hand position after replacing the grip.

Watch the video!


by ScegliAuto

More videos