Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Assembly of the rear headlight of the Ducati Monster 620

Model: Ducati Monster 620 I E
Part: Tail light

Video tutorial

If the rear light of the Ducati Monster is damaged and needs to be replaced, we can take the opportunity to install a LED version to improve the aesthetics and increase visibility. Start by removing the seat, using a 10mm ratchet wrench to unscrew the two bolts that secure the light, remove it and disconnect the three electrical connections.

Take the new light, cut the terminals of the three wires and insert three connectors in their place and tighten them with the appropriate pliers. Restore the electrical connections respecting the wire colors, perform a test to verify that everything works correctly, position the light in its housing, and secure it with the bolts.


Posted on 10 August 2025 by ScegliAuto


Related tutorials

How to Replace the Headlight Bulb on the Ducati Monster 620
How to Replace the Headlight Bulb on the Ducati Monster 620
Monster 620 I E To replace the headlight bulb on the Ducati Monster 620, you need to loosen the screw located just beneath the headlight, allowing it to be removed a…
How to Replace the Headlight Bulb on a Ducati Monster 620?
How to Replace the Headlight Bulb on a Ducati Monster 620?
Monster 620 I E To replace the headlight bulb on a Ducati Monster 620, loosen the screws that secure the headlight unit to its housing. This will allow the headlight…
How to Change the Engine Oil in a Ducati Monster 620?
How to Change the Engine Oil in a Ducati Monster 620?
Monster 620 I E Hello, today you will change the engine oil in your Ducati Monster 620. Start by warming up the engine for 5 minutes, then position the bike on a cen…

An Affordable Modification to Solve a Problem on the Yamaha MT07

This video shows how to solve a problem affecting the Yamaha MT07 with a very affordable modification. This bike requires a specific movement of the throttle grip to accelerate, which forces the right wrist into an unnatural twist. You can remedy this by fitting the throttle control from the R6, which reduces the rotation from 90° to 45°; the cost is under £25 even when buying the original part directly from the dealership. As shown, the disassembly and reassembly work is extremely simple; just be careful not to let the throttle guide slip, as it has its seat directly in the cover. You can see the difference in hand position after replacing the grip.

Watch the video!


by ScegliAuto

More videos