Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Engine Oil in a Ducati Monster 620?

Model: Ducati Monster 620 I E
Part: Engine oil

Video tutorial

Hello, today you will change the engine oil in your Ducati Monster 620. Start by warming up the engine for 5 minutes, then position the bike on a central stand to ensure it is perfectly vertical. Next, you will need to unscrew the upper oil filler cap. After that, place a container underneath the oil sump, then unscrew the lower drain bolt to allow the engine oil to drain out. Once the oil has drained, re-screw the lower bolt.

At this point, you can add the new oil, completing the engine oil change for your Ducati Monster 620.


Updated on 14 September 2026 by ScegliAuto


Related tutorials

How to Change the Engine Oil in the Ducati Monster 620?
How to Change the Engine Oil in the Ducati Monster 620?
Monster 620 I E As we can see in this tutorial, changing the engine oil in the Ducati Monster 620 is an extremely simple and quick operation. First, wait for the eng…
How to change the engine oil in the Ducati Monster 620?
How to change the engine oil in the Ducati Monster 620?
Monster 620 I E Changing the engine oil in the Ducati Monster 620, as shown in this tutorial, is an extremely simple and quick operation. First, wait until the engin…
How to replace the engine oil in the Ducati Monster 620?
How to replace the engine oil in the Ducati Monster 620?
Monster 620 I E In this tutorial we can see how to replace the motor oil in the Ducati Monster 620, an extremely simple and quick operation to be carried out every 1…

How to Replace the Rear Brake Pads on a Derbi Senda 125?

To replace the rear brake pads on a Derbi Senda 125, loosen the nut that secures the central axle of the rear wheel so that it can be completely removed from its housing. Once the wheel is removed, you can slide out the pin that secures the pads inside the brake caliper and remove them from their housing. After the old pads have been removed, insert the new replacement parts, securing them with the pin. Finally, reinstall the rear wheel, positioning it at the end of the swingarm.

Watch the video!


by ScegliAuto

More videos