Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In this tutorial we can see how to replace the engine oil in the Ducati Streetfighter V4, a very simple and quick operation. First of all, we wait for the engine to be cold enough, then we position a container under the motorcycle, locate the drain hole bolt and unscrew it using a socket wrench. We then let all the oil contained in the system drain out, remove the cover of the filter cap and open the cap itself. At this point, all that remains is to insert the replacement filter, reassemble everything and pour the necessary amount of oil through the appropriate upper hole.

Posted on 13 November 2025 by ScegliAuto

Video tutorial

Related tutorials

How to replace the engine oil and oil filter of the Ducati Streetfighter V4.
How to replace the engine oil and oil filter of the Ducati Streetfighter V4.
Streetfighter V4 S Today we will go over the instructions that will allow us to perform the routine maintenance service by replacing the engine oil and oil filter on th…
Engine Oil and Oil Filter Replacement for Ducati Streetfighter V4 S
Engine Oil and Oil Filter Replacement for Ducati Streetfighter V4 S
Streetfighter V4 S In this guide, you will learn the main steps to remove the oil filter and replace the engine oil of a 2020 Ducati Streetfighter V4 S. First, remove t…
How do you replace the air filter of the Ducati Streetfighter V4S?
How do you replace the air filter of the Ducati Streetfighter V4S?
Streetfighter V4 S To replace the air filter of the Ducati Streetfighter V4S, you will need to loosen the screws that secure the cover of the filter box: this will be l…

How to Replace the Battery in the Royal Enfield Classic 350?

Replacing the battery in the Royal Enfield Classic is an extremely simple and quick operation. First, ensure the key is not inserted for safety. Locate the small panel on the left side, then insert the key into the corresponding cylinder and unlock the lock. Once the panel is removed, unclip the various wiring clips, remove the fuse box, and take the battery out of its housing. Now, disconnect the terminals, connect them to the replacement battery, and reassemble everything by following the reverse procedure.

Watch the video!


by ScegliAuto

More videos