Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the motor oil in the Ducati Streetfighter V4?

Model: Ducati Streetfighter V4 S
Part: Engine oil

Video tutorial

In this tutorial we can see how to replace the engine oil in the Ducati Streetfighter V4, an extremely simple and quick operation. First of all, make sure that the engine is sufficiently cold, then place a container under the bike, locate the drain plug and unscrew it using a socket wrench.

Wait for all the oil to drain out, open the filter cap and insert the replacement with a new gasket. At this point, all that's left is to put everything back together and add the necessary amount of oil through the appropriate upper hole.


Posted on 13 October 2025 by ScegliAuto


Related tutorials

How to replace the engine oil and oil filter of the Ducati Streetfighter V4.
How to replace the engine oil and oil filter of the Ducati Streetfighter V4.
Streetfighter V4 S Today we will go over the instructions that will allow us to perform the routine maintenance service by replacing the engine oil and oil filter on th…
Engine Oil and Oil Filter Replacement for Ducati Streetfighter V4 S
Engine Oil and Oil Filter Replacement for Ducati Streetfighter V4 S
Streetfighter V4 S In this guide, you will learn the main steps to remove the oil filter and replace the engine oil of a 2020 Ducati Streetfighter V4 S. First, remove t…
How to Replace the Engine Oil and Oil Filter on the Ducati Streetfighter V4 S
How to Replace the Engine Oil and Oil Filter on the Ducati Streetfighter V4 S
Streetfighter V4 S Today's instructions will illustrate how to perform the routine maintenance service by replacing the engine oil and oil filter on the Ducati Streetfi…

How to Change the Engine Oil on a Kawasaki Ninja 650?

To change the engine oil on a Kawasaki Ninja 650, it is important to start by warming up the engine for a few minutes, so the oil becomes more fluid and easier to drain. Position the bike on a stable stand, such as a centre or side stand. Locate the oil drain plug at the bottom of the engine and place a container underneath to collect the used fluid. Carefully unscrew the plug, allowing the old oil to drain completely. Once emptied, screw the plug back in, ensuring it is tight to avoid leaks. Proceed to add new oil through the top opening of the reservoir, following the type and quantity recommended by the manufacturer. After filling, start the engine to circulate the fresh oil, then turn it off and check the level, adding more if necessary to reach the optimal level.

Watch the video!


by ScegliAuto

More videos