Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
Today's instructions will illustrate how to perform the routine maintenance service by replacing the engine oil and oil filter on the Ducati Streetfighter V4 S. First, place the bike on a stand and begin by unscrewing the oil drain bolt located under the engine, allowing it to drain into a container for about ten minutes; then unscrew the screws of the oil filter cover, replacing the cartridge with the new one, as shown in the video. At this point, unscrew the filler cap and top up with the new engine oil, starting the engine and topping up again if necessary.

Posted on 12 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the engine oil and oil filter of the Ducati Streetfighter V4.
How to replace the engine oil and oil filter of the Ducati Streetfighter V4.
Streetfighter V4 S Today we will go over the instructions that will allow us to perform the routine maintenance service by replacing the engine oil and oil filter on th…
How to Change the Engine Oil in the Ducati Streetfighter V4 S?
How to Change the Engine Oil in the Ducati Streetfighter V4 S?
Streetfighter V4 S In this tutorial, see how to change the engine oil in the Ducati Streetfighter V4 S, an extremely simple and quick operation. First, ensure that the …
How to replace the engine oil in the Ducati Streetfighter V4?
How to replace the engine oil in the Ducati Streetfighter V4?
Streetfighter V4 S In this tutorial we can see how to replace the engine oil in the Ducati Streetfighter V4, a very simple and quick operation. First of all, we wait fo…

How to Replace the Battery in the Royal Enfield Classic 350?

Replacing the battery in the Royal Enfield Classic is an extremely simple and quick operation. First, ensure the key is not inserted for safety. Locate the small panel on the left side, then insert the key into the corresponding cylinder and unlock the lock. Once the panel is removed, unclip the various wiring clips, remove the fuse box, and take the battery out of its housing. Now, disconnect the terminals, connect them to the replacement battery, and reassemble everything by following the reverse procedure.

Watch the video!


by ScegliAuto

More videos