|
Do it yourself
| |||
| ||||
Model: Ducati 848
To remove the mirrors on a Ducati 848, you need to remove the screws located on the inside of the windscreen, just above the handlebars. The screws must be loosened on both the right and left sides. Once these are removed, you can pull off the mirrors, disconnecting the relevant connector for both. Once the old mirrors have been removed, you can install the new parts. These should be connected to their connector and secured again with the previously removed screws.
Updated on 23 April 2026 by ScegliAuto
Video tutorial
Related tutorials
848
To replace the clutch on a Ducati 848, loosen the screws that secure the clutch cover, allowing it to be completely removed from its housing to acces…
848
To replace the seat on a Ducati 848, lift the padding at the rear of the seat to access the two screws underneath. Once located, loosen these two scr…
848
In order to disassemble the engine of the Ducati 848, you need to loosen the screws that fix it to the appropriate supports, so that it is possible t…
|
How to Replace the Front Headlight Bulb on a BMW R1150 R?
This tutorial shows how to replace the front headlight bulb on a BMW R1150 R, a very simple and quick task. First, ensure the key is not inserted for safety. Then locate the screw at the bottom edge of the headlight and remove it. Next, separate the headlight from the base, disconnect the power connector, and extract the old bulb by releasing the metal clip. Finally, insert the new bulb without touching the glass with bare hands, and reassemble everything by following the reverse procedure. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.006
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
