Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
To replace the clutch in the Ducati Multistrada 1260, you need to loosen the screws that secure the circular cover on the right side of the bike: after these screws are removed, you can detach the cover and access the underlying components. The clutch can be removed from its housing by unscrewing the fastening screws and removing all the discs that make it up; after the old clutch has been removed, you can insert the new one by securing all the corresponding screws and then installing the cover.

Updated on 22 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the cooling liquid of the Ducati Multistrada 1260
How to replace the cooling liquid of the Ducati Multistrada 1260
Multistrada 1260 Today we will see step by step instructions on how to replace the engine coolant of the Ducati Multistrada 1260. First of all, we put the motorcycle …
How to replace the rear wheel of the Ducati Multistrada 1260 Enduro
How to replace the rear wheel of the Ducati Multistrada 1260 Enduro
Multistrada 1260 The information provided in this guide will show us how to disassemble and replace the rear wheel or tire of the Ducati Multistrada 1260 enduro motor…
Replace the air filter of the Ducati Multistrada 1260
Replace the air filter of the Ducati Multistrada 1260
Multistrada 1260 Let's briefly discover the instructions that will allow you to remove and replace the engine air filter of the Ducati Multistrada 1260 in simple and …

How to Remove the Handlebar Ends and Mirrors on the Royal Enfield Interceptor 650

This guide shows how to remove the handlebar ends and replace the mirrors on the Royal Enfield Interceptor 650. The first step is to unscrew the bolt holding the handlebar end in place using an Allen key. Once the bolt is removed, carefully pull out the finishing block. Take the replacement finishing block and, after loosening the fixing hex bolt, insert it into position and tighten it. Install the mirrors at the end of the element and tighten the mirror fixing bolt. Make the necessary adjustments to ensure proper rear visibility.

Watch the video!


by ScegliAuto

More videos