Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Engine Oil and Oil Filter on the Ducati Panigale 1299

Model: Ducati Panigale 1299
Part: Engine oil

Video tutorial

Follow these step-by-step instructions to change the engine oil and oil filter on the Ducati Panigale 1299. First, unscrew and remove the screws of the fairing located under the engine. Then, unscrew the oil drain bolt and let it drain into a container for about ten minutes, as shown in the video.

Next, use the appropriate tool to unscrew and replace the oil filter cartridge, also replacing the gasket. Finally, unscrew the filler cap and pour in the new engine oil!


Updated on 25 June 2026 by ScegliAuto


Related tutorials

How to Remove the Air Filter from a Ducati Panigale 1299
How to Remove the Air Filter from a Ducati Panigale 1299
Panigale 1299 Before you begin, position your Ducati Panigale 1299 on a suitable motorcycle stand. Start by removing the rider's seat, unscrewing the relevant fixi…
How to Replace the Front Headlight Bulb on a Ducati Panigale 1299
How to Replace the Front Headlight Bulb on a Ducati Panigale 1299
Panigale 1299 Today's guide will show you how to replace the front headlight bulb on the Ducati Panigale 1299 in simple steps. First, place your motorcycle on a st…
How to Replace the Front Brake Pads on the Ducati Panigale 1299
How to Replace the Front Brake Pads on the Ducati Panigale 1299
Panigale 1299 In this video tutorial, follow the main steps to remove and replace the front brake pads on the Ducati Panigale 1299 motorcycle. First, place your bi…

How to Replace the Headlight Bulb of a Triumph Speed Twin?

To replace the headlight bulb of the Triumph Speed Twin, you need to loosen the screws that secure the headlight unit in place: these screws will be located at the bottom right and bottom left of the headlight unit. Once these are loosened, you can proceed to pull the headlight from its housing and disconnect the connectors inside: the corresponding bulb can now be extracted from inside the headlight unit, allowing you to insert the new one, remounting all the parts you just removed.

Watch the video!


by ScegliAuto

More videos