Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In today’s video, you will see how to convert the front headlight from halogen to LED on the Ducati Monster 797. First, purchase the bulbs you prefer, perhaps from dedicated motorcycle lighting parts websites. Once done, proceed. Remove the headlight from its housing by extracting the relevant clips. Once the headlight is removed, disconnect the power connectors. Then, extract the rear part of the headlight and proceed with the replacement of the component. Once inserted, reassemble everything and test it.

Updated on 28 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Brake and Clutch Levers on the Ducati Monster 796
Replacing the Brake and Clutch Levers on the Ducati Monster 796
Monster 797 In this short video, you will see how to remove and replace the front brake and clutch levers on a Ducati Monster 796, as well as on other models wit…
How to Replace the Rear Wheel on the Ducati Monster 796
How to Replace the Rear Wheel on the Ducati Monster 796
Monster 797 Here are the main instructions on how to remove and replace the rear wheel or tyre of the Ducati Monster 796 in simple steps. First, place the rear s…
How to Change the Engine Oil of the Ducati Monster 797?
How to Change the Engine Oil of the Ducati Monster 797?
Monster 797 To change the engine oil of the Ducati Monster 797, loosen the drain plug located at the bottom centre of the bike. Once the plug is unscrewed, colle…

What Does the V-Belt Light Indicate on a Yamaha NMAX Scooter and How to Remove It?

If the V-BELT light has illuminated on the instrument cluster of your Yamaha NMAX scooter, it means it is time to replace the drive belt as it has exceeded the relevant interval. You can entrust this maintenance task to your trusted workshop; the cost will not be particularly excessive. Once this is done, you can manually reset the light by following the procedure shown in this tutorial. First, turn on the instrument cluster, then repeatedly press the left button on the dashboard to reach the service interval in question. At this point, press and hold the right button once to initialise the reset, and a second time to complete it.

Watch the video!


by ScegliAuto

More videos