Do it yourself
Frequently asked questions about cars and motorcycles
  1. Motorcycles
  2. :
  3. Ducati
  4. :
  5. Monster 796
  6. : How to replace the sprocket of the Ducati Monster 796.

Model: Ducati Monster 796
How to replace the sprocket of the Ducati Monster 796.

In this short and simple guide, we will see how to disassemble and replace the sprocket of the transmission of the Ducati Monster 797 motorcycle. First, we put the motorcycle on the stand and start unscrewing the fixing screws of the sprocket cover, in order to remove it; then we loosen the chain adjustment screw that we find on the back, as shown in the video. At this point, we unscrew the sprocket screws to remove it, replacing it with the new one; if necessary, we also replace the crown and the transmission chain, following the video tutorial until the end!


Posted on 8 April 2023 by ScegliAuto

How do you bleed the Gilera Nexus 500 brakes?

In order to bleed the Gilera Nexus 500 brakes, you need to open the drawer that is located in correspondence with the knob, unscrewing the fixing screws of the cover. Once this has been opened, it will be possible to insert a small tube inside the vent on the brake caliper: therefore, by opening the valve, the brake fluid can be collected inside a container. When all the fluid has flowed out, it will be possible to fill in the new brake oil from the vent that was previously opened by removing the cover next to the knob.

Watch the video!


by ScegliAuto

More videos