Do it yourself
Frequently asked questions about cars and motorcycles
This guide will show you the steps to remove and replace the fuel pump and the fuel level sensor (float) of the Ducati Panigale 959. First, you need to remove the tank from the bike by unscrewing the fastening screws and disconnecting the fuel line; then disconnect the electrical connector of the float. At this point, unscrew the fastening screws of the fuel pump, prying at the sides to detach and remove it from the tank; replace it with the new original one and refit the fuel tank!

Updated on 26 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Panigale 959 To replace the exhaust on the Ducati Panigale 959, loosen the screws that secure the fairing on the right side of the bike: these will be located on …
Panigale 959 Today, we will discover the main instructions that will allow you to bleed and subsequently top up the coolant in the engine of the Ducati Panigale 9…
Panigale 959 In this video tutorial, you will see how to remove and replace the brake and clutch levers on a Ducati Panigale 959 in simple steps. First, remove th…

Dismantling and Replacing the Front Cowl of the Kymco Super8 150

Follow these simple steps to dismantle and replace the front cowl of the Kymco Super 8 150 scooter. First, place the scooter on the centre stand and start unscrewing and removing the screws located at the rear of the front cowl; then unscrew the additional screws found underneath, first removing the cover situated above the front headlamp and then the rest of the remaining cowl, as shown in the video. At this point, install the new front cowls, securing all components correctly, following the video tutorial to the end!

Watch the video!


by ScegliAuto

More videos