Do it yourself
Frequently asked questions about cars and motorcycles

Model: Ducati Desert X
Part: Shocks

To replace the rear shock absorber on the Ducati Desert X, you must completely detach the seat from its housing by loosening the screws that secure it: once the seat has been removed, you can leverage to detach the side panel corresponding to the seat, allowing access to the shock absorber underneath. The shock absorber can be removed from its position by loosening the nut that secures it at the top and bottom: at this point, insert the new replacement part, securing it with the appropriate screws.

Updated on 27 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Desert X To replace the air filter of the Ducati Desert X, you need to loosen the screws that secure the fuel tank of the motorcycle to its housing, so that i…
Desert X To replace the air filter on the Ducati Desert X, loosen the screws securing the fuel tank to its housing: the screws are located at the front of the…
Desert X To replace the air filter on the Ducati Desert X, loosen the screws that secure the fuel tank to its housing: the screws are located at the front of …

How to Change the Speed Unit on the Piaggio Mp3

If the speed displayed on your Piaggio Mp3 is in a unit of measurement different from your preference, simply follow this mini guide to change it independently. First, start this procedure with the bike completely off. Then, press and hold the "Mode" button on the right knob for about three seconds and turn on the display. Once done, press the "Mode" button again to switch between units (from Km/h to Mph or vice versa). Finally, hold down "Set" to save the changes.

Watch the video!


by ScegliAuto

More videos