Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Air Filter on the Ducati Streetfighter V4

Model: Ducati Streetfighter V4 S
Part: Air filter

Video tutorial

To replace the air filter on the Ducati Streetfighter V4, loosen the screws that secure it to its housing: this is located at the front of the bike, just behind the fork. Once the securing screws are loosened, you can pull the old filter from its seat; the new one can now be inserted and secured with the appropriate screws.

After installation, cover the filter housing with the designated cover and check that everything is functioning correctly.


Updated on 21 September 2026 by ScegliAuto


Related tutorials

How to Replace the Air Filter on a Ducati Streetfighter V4 S?
How to Replace the Air Filter on a Ducati Streetfighter V4 S?
Streetfighter V4 S To replace the air filter on a Ducati Streetfighter V4 S, loosen the screws securing the front cover located just below the fuel tank and behind the …
How do you replace the air filter of the Ducati Streetfighter V4S?
How do you replace the air filter of the Ducati Streetfighter V4S?
Streetfighter V4 S To replace the air filter of the Ducati Streetfighter V4S, you will need to loosen the screws that secure the cover of the filter box: this will be l…
How to Replace the Air Filter on a Ducati Streetfighter V4 S?
How to Replace the Air Filter on a Ducati Streetfighter V4 S?
Streetfighter V4 S To replace the air filter on a Ducati Streetfighter V4 S, loosen the screws securing the filter box: these screws are located at the front of the bik…

How to Change the Engine Oil on a Kawasaki Ninja 650?

To change the engine oil on a Kawasaki Ninja 650, it is important to start by warming up the engine for a few minutes, so the oil becomes more fluid and easier to drain. Position the bike on a stable stand, such as a centre or side stand. Locate the oil drain plug at the bottom of the engine and place a container underneath to collect the used fluid. Carefully unscrew the plug, allowing the old oil to drain completely. Once emptied, screw the plug back in, ensuring it is tight to avoid leaks. Proceed to add new oil through the top opening of the reservoir, following the type and quantity recommended by the manufacturer. After filling, start the engine to circulate the fresh oil, then turn it off and check the level, adding more if necessary to reach the optimal level.

Watch the video!


by ScegliAuto

More videos