Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Periodic aesthetic maintenance of the Royal Enfield Interceptor 650

Model: Enfield Interceptor 650
Part: Checks and maintenance

Video tutorial

In this video, learn how to perform periodic maintenance on the Royal Enfield Interceptor 650; the YouTuber starts with a thorough clean using a degreasing and polishing foam: you can easily find all the products in physical stores or online. A good wipe with a sponge will clean the bike thoroughly, and a careful drying with a microfibre cloth will restore the bodywork and all chrome parts to their original shine.

Don't forget to apply wax to the bodywork and a specific product for the chrome parts, which will then be removed with a brush attached to a drill. Also, clean the chain, which should then be lubricated with the appropriate lubricant.

A bit of WD-40 on the various locks and seals, and a spray of brake cleaner.


Updated on 31 October 2026 by ScegliAuto


Related tutorials

Is the user manual for the Royal Enfield Interceptor 650 available in German?
Is the user manual for the Royal Enfield Interceptor 650 available in German?
Interceptor 650 Yes, the user manual for the Royal Enfield Interceptor 650, to be consulted for performing routine maintenance and any repairs, is mainly available i…
How do you replace the exhaust pipe of the Royal Enfield Interceptor 650?
How do you replace the exhaust pipe of the Royal Enfield Interceptor 650?
Interceptor 650 The replacement of the exhaust of the Royal Enfield Interceptor 650 can be done by loosening the screws on the appropriate supports located on the le…
How do you replace the battery of the Royal Enfield Interceptor 650?
How do you replace the battery of the Royal Enfield Interceptor 650?
Interceptor 650 To replace the battery on the Royal Enfield Interceptor 650, you will need to open the corresponding cover with the key, which is located on the righ…

How to Replace the Air Filter on a Sym Jet 180

To replace the air filter on a Sym Jet 180, loosen the screws securing the cover located on the left side of the bike, near the rear wheel and above the transmission cover. Once you locate this cover, loosen the screws holding its lid and then loosen the screws securing the filter in its housing. After removing the screws, you can pull the filter from its housing and replace it with a new one; this can now be covered with the cover, ensuring everything functions correctly.

Watch the video!


by ScegliAuto

More videos