Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Enfield Meteor 350
Part: Wheel

In order to replace the front wheel of the Royal Enfield Meteor 350, you need to loosen the screws that secure the central nuts of the wheels, which fix the corresponding axle to the end of the front fork: once the wheel is released, you can proceed by loosening the screws that secure the brake caliper to the corresponding disc. In this way, the caliper can be removed from the disc and the wheel will become free: now it will be possible to remove it from its seat so that the new one can be inserted. This must be properly fixed so that everything works correctly.

Posted on 30 January 2025 by ScegliAuto

Video tutorial

Related tutorials

How to disassemble the rear wheel of the Royal Enfield Meteor 350
How to disassemble the rear wheel of the Royal Enfield Meteor 350
Meteor 350 Today's procedure will show us how to replace the rear wheel of the Royal Enfield Meteor 350 motorcycle, in a few simple steps. First, we put the mot…
How to Replace the Indicator Bulb on the Royal Enfield Meteor 350
How to Replace the Indicator Bulb on the Royal Enfield Meteor 350
Meteor 350 To replace the indicator bulb on the Royal Enfield Meteor 350, unscrew the screw located at the back of the indicator unit. This will allow you to re…
Replacing the Clutch Cable on the Royal Enfield Meteor 350
Replacing the Clutch Cable on the Royal Enfield Meteor 350
Meteor 350 This guide provides instructions for removing and replacing the clutch cable on the Royal Enfield Meteor 350 motorcycle. First, place the bike on its…

How to Replace the Front Headlight on the BMW F800GS

In this tutorial, you will see how to replace the front headlight on the BMW F800GS, an extremely simple and quick operation. First, ensure the key is not inserted for safety, then locate the power connector at the back of the headlamp and disconnect it by pressing the clip. Next, unscrew the two side bolts using a Torx T40 key, grasp the headlight and pull it away from the support. At this point, you can insert the replacement, tighten the two bolts, and reconnect the power connector.

Watch the video!


by ScegliAuto

More videos