Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In order to replace the windshield of the Royal Enfield Continental GT 650, you will need to loosen the screws that secure the component to its housing: the screws will be located on the lower sides of the windshield itself. The corresponding fixing screws can be loosened and the respective plates removed so that the windshield can be removed from its housing: at this point it will be possible to insert the new replacement piece so that it can be fixed with the appropriate screws at the bottom to ensure that the piece does not move during driving.

Posted on 20 February 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Exhaust on the Royal Enfield Continental GT 650
How to Replace the Exhaust on the Royal Enfield Continental GT 650
Continental Gt 650 To replace the exhaust on the Royal Enfield Continental GT 650, you need to loosen the bolt that secures the connecting clamp between the exhaust and…
How to replace the front headlight on the Royal Enfield Continental GT 650?
How to replace the front headlight on the Royal Enfield Continental GT 650?
Continental Gt 650 In this tutorial we can see how to replace the front headlight on the Royal Enfield Continental GT 650, an extremely simple and quick operation. Firs…
How to Replace the Front Headlamp in the Royal Enfield Continental GT 650?
How to Replace the Front Headlamp in the Royal Enfield Continental GT 650?
Continental Gt 650 In this tutorial, you will see how to replace the front headlamp in the Royal Enfield Continental GT 650, a very simple and quick operation. First, e…

How to Check the Coolant Level in a Yamaha Xmax

In the following video, you will learn how to check the coolant level in a 2008 Yamaha Xmax. First, position the motorcycle on a stable surface by raising the stand. Next, lift the cover located at the top of the motorcycle to access the coolant drain bolt. To top up the coolant, unscrew the cap as shown in the video and add the fluid until it reaches the maximum level, indicated as Max. Once finished, close the valve and refit the cover. At this point, start the engine and let it run at idle for a few minutes to eliminate any air bubbles that may have formed inside.

Watch the video!


by ScegliAuto

More videos