Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In this tutorial, you will see how to replace the front headlamp in the Royal Enfield Continental GT 650, a very simple and quick operation. First, ensure the key is not inserted. Then, position yourself in front of the headlamp, locate the two screws at the bottom, and using a cross-head screwdriver, remove both. Next, separate the lamp from the base, disconnect the power connector, and remove the outer metal ring. Finally, follow the reverse procedure to reassemble everything.

Updated on 4 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the front headlight on the Royal Enfield Continental GT 650?
How to replace the front headlight on the Royal Enfield Continental GT 650?
Continental Gt 650 In this tutorial we can see how to replace the front headlight on the Royal Enfield Continental GT 650, an extremely simple and quick operation. Firs…
How to Remove the Seat of a Royal Enfield Continental GT 650
How to Remove the Seat of a Royal Enfield Continental GT 650
Continental Gt 650 Start by freeing the right side fairing of your Royal Enfield Continental GT 650 by turning the key in the lock and then disengaging the fairing. Thi…
How to Replace the Battery on the Royal Enfield Continental GT 650?
How to Replace the Battery on the Royal Enfield Continental GT 650?
Continental Gt 650 To replace the battery on the Royal Enfield Continental, detach the protective cover located on the left side of the bike, just below the seat. Here,…

How to Remove the Final Drive from a BMW R 1200 GS?

To remove the final drive from a BMW R 1200 GS, loosen the bolts securing the exhaust so it can be removed along with the rear wheel. The rear wheel will also be removed by unscrewing the five bolts that secure it to the swingarm. Next, detach the brake caliper by unscrewing the mounting bolts and remove the rear part of the swingarm. Inside, you will find the final drive, which should be extracted and replaced with a new spare part; after replacement, reassemble all previously removed components.

Watch the video!


by ScegliAuto

More videos