Do it yourself
Frequently asked questions about cars and motorcycles

How to Dismantle the Cylinder Head Assembly on the KTM SX-F 350

Model: Ktm Sx F 350
Part: Cylinder head

Video tutorial

The following steps will allow you to dismantle and replace the cylinder head assembly, which consists of the head, cylinder, and piston, on the KTM SX-F 350 enduro bike. The dismantling operation can occur with the engine installed; however, for simplicity, the engine block has been removed from the frame in this case.

First, remove the spark plug from the head and begin unscrewing its bolts to remove it; dismantle the exhaust and then slide out the cylinder, as shown in the video. At this point, remove the piston pin to extract the piston as well, finally replacing the cylinder head assembly!


Updated on 11 August 2026 by ScegliAuto


Related tutorials

Sx F 350 .. and replace the water pump on the KTM SX-F 350 enduro bike. First, place the bike on a stand and start draining the engine coolant by disconnecting.. …
Sx F 350 .. and replace the water pump gasket on the KTM SX-F 350 enduro bike. First, place the bike on a stand and start removing the side cover of the water pump.. …
Sx F 350 .. remove and replace the spark plug on the KTM SX-F 350 enduro bike. First, place the bike on a stand and start by removing the rider's seat and the fuel.. …

How to Replace the Air Filter on the BMW F650 GS?

To replace the air filter on the BMW F650 GS, loosen the screws securing the panel located at the centre of the fuel tank. Once the screws are loosened, you can completely detach the panel and locate the air filter box underneath. This can now be opened to extract the air filter inside. Replace it with a new spare part, then refit the panel and check that everything is functioning correctly.

Watch the video!


by ScegliAuto

More videos