Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In this tutorial we can see how to replace the front headlight on the Royal Enfield Continental GT 650, an extremely simple and quick operation. First of all, make sure that the key is not inserted, then locate the two screws located in the lower area of the headlight and unscrew them using a simple screwdriver with a cross tip. Next, grab the headlight, separate it from the base, and disconnect the internal power connector. At this point, all that's left to do is transfer the bulbs to the replacement, if necessary, and mount it following exactly the reverse procedure.

Posted on 5 May 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Headlamp in the Royal Enfield Continental GT 650?
How to Replace the Front Headlamp in the Royal Enfield Continental GT 650?
Continental Gt 650 In this tutorial, you will see how to replace the front headlamp in the Royal Enfield Continental GT 650, a very simple and quick operation. First, e…
How to Remove the Seat of a Royal Enfield Continental GT 650
How to Remove the Seat of a Royal Enfield Continental GT 650
Continental Gt 650 Start by freeing the right side fairing of your Royal Enfield Continental GT 650 by turning the key in the lock and then disengaging the fairing. Thi…
How to Change the Engine Oil in a Royal Enfield Continental GT 650?
How to Change the Engine Oil in a Royal Enfield Continental GT 650?
Continental Gt 650 In this tutorial, see how to change the engine oil in a Royal Enfield Continental GT 650, a very simple and quick operation. First, ensure the engine…

How to Check the Coolant Level in a Yamaha Xmax

In the following video, you will learn how to check the coolant level in a 2008 Yamaha Xmax. First, position the motorcycle on a stable surface by raising the stand. Next, lift the cover located at the top of the motorcycle to access the coolant drain bolt. To top up the coolant, unscrew the cap as shown in the video and add the fluid until it reaches the maximum level, indicated as Max. Once finished, close the valve and refit the cover. At this point, start the engine and let it run at idle for a few minutes to eliminate any air bubbles that may have formed inside.

Watch the video!


by ScegliAuto

More videos