Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
To change the engine oil of a Royal Enfield Meteor 350, start by warming up the engine for a few minutes to fluidify the oil. Turn off the engine and place the motorcycle on a central stand to ensure stability. Locate the oil drain plug under the engine. Place a collection tray under the drain plug and use a wrench to unscrew it, allowing the oil to completely drain into the tray. Once all the oil has been drained, securely screw the drain plug back in. Find the oil fill cap on the side of the engine, remove it, and use a funnel to slowly pour the recommended amount of new oil as stated in the owner's manual. After pouring the oil, replace the fill cap and tighten it securely. Start the engine and let it run for a few minutes, then turn it off and check for any oil leaks. This process ensures that the new oil is evenly distributed in the engine and everything is in order.

Posted on 22 April 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Engine Oil of the Royal Enfield Meteor 350
How to Change the Engine Oil of the Royal Enfield Meteor 350
Meteor 350 In this guide, learn how to replace the engine oil and oil filter of the Royal Enfield Meteor 350 in simple and quick steps. First, place your motorc…
Replace Engine Oil and Oil Filter on Royal Enfield Meteor 350
Replace Engine Oil and Oil Filter on Royal Enfield Meteor 350
Meteor 350 Today, learn how to perform routine maintenance by changing the engine oil and oil filter on a Royal Enfield Meteor 350. First, position the motorcyc…
How to change the engine oil of a Royal Enfield Meteor 350?
How to change the engine oil of a Royal Enfield Meteor 350?
Meteor 350 To change the motor oil of a Royal Enfield Meteor 350, park the motorcycle on a flat surface and make sure the engine is turned off and cold. Locate …

How to Replace the Clutch on a Triumph Speed Triple?

To replace the clutch on a Triumph Speed Triple, loosen the bolts securing the covers of the three casings located on the right side of the bike, namely the starter motor, the engine, and then the clutch. Once these covers are removed, you can access the bolts securing the clutch, unscrew them, and slide the clutch plates out of their housing. This will allow you to insert the new plates into their place, securing everything with the appropriate bolts; finally, reinstall all the casings.

Watch the video!


by ScegliAuto

More videos