Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In order to replace the front headlight of the Royal Enfield Classic 350, you need to loosen the screws that secure the panel covering the front of the motorcycle and surrounding the headlight itself: these screws will be located inside the headlight assembly and at the top of the fork. Once the screws have been loosened, it will be possible to completely detach the headlight assembly and disconnect its connectors inside: these will need to be connected to the new headlight, positioning it in its seat and securing it with the screws. Finally, you can cover everything with the previously removed panel.

Posted on 4 July 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Headlamp Bulb on the Royal Enfield Classic 350
How to Replace the Headlamp Bulb on the Royal Enfield Classic 350
Classic 350 To replace the headlamp bulb on the Royal Enfield Classic 350, loosen the screws around the perimeter of the headlamp so that it can be released from…
How to replace the front headlight on the Royal Enfield Classic 350?
How to replace the front headlight on the Royal Enfield Classic 350?
Classic 350 In this tutorial we can see how to replace the front headlight on the Royal Enfield Classic 350, an extremely simple and quick operation. First of al…
How to Replace the Front Indicator Bulb on a Royal Enfield Classic 350?
How to Replace the Front Indicator Bulb on a Royal Enfield Classic 350?
Classic 350 To replace the front indicator bulb on a Royal Enfield Classic 350, loosen the screw located at the rear of the corresponding headlamp. Once this scr…

How to Replace the Engine Oil and Oil Filter on an Aprilia RSV 1000

This short video will show you how to carry out the routine maintenance service by replacing the engine oil and oil filter on the Aprilia RSV 1000 motorcycle. First, place your motorcycle on the centre stand and start by unscrewing the oil drain bolt located under the engine, allowing it to drain into a container for about ten minutes; then use the appropriate tool to unscrew and remove the oil filter, replacing the cartridge with a new one as shown in the video. Finally, unscrew the filler screw and top up by pouring in the suitable oil for your engine!

Watch the video!


by ScegliAuto

More videos