Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
To reset the Service light that appears on the instrument panel of the Royal Enfield Himalayan, you need to press and hold the button located on the right side of the instrument panel while it is turned off: continue to hold the button, it will be possible to insert the ignition key into the corresponding slot and turn it to turn on the panel. Once the panel is turned on, wait for a few seconds until the Service light disappears completely; after the reset, you can release the button and turn off the panel.

Posted on 29 July 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Indicator Bulb on a Royal Enfield Himalayan?
How to Replace the Front Indicator Bulb on a Royal Enfield Himalayan?
Himalayan To replace the front indicator bulb on the Royal Enfield Himalayan, you need to loosen the screw that secures the corresponding light unit next to th…
How do you replace the levers of the Royal Enfield Himalayan?
How do you replace the levers of the Royal Enfield Himalayan?
Himalayan In order to replace the levers of the Royal Enfield Himalayan, you will need to loosen the screws that secure them to their housings on the sides of …
How do you replace the exhaust pipe of the Royal Enfield Himalayan?
How do you replace the exhaust pipe of the Royal Enfield Himalayan?
Himalayan In order to replace the exhaust of the Royal Enfield Himalayan, you need to loosen the screws that secure the exhaust terminal to its housing, locate…

How to replace the air filter in the Herald Classic 125?

In this tutorial, you will see how to replace the air filter in the Herald Classic 125, a very simple and quick operation. First, position yourself on the left side of the motorcycle, then grab the panel located under the seat, pull it towards you, and detach it from the frame. Next, unscrew the three fastening screws of the airbox cover, remove it, and take out the old filter from its housing. At this point, remove any dirt residue present, insert the replacement filter, and reassemble everything by following the reverse procedure.

Watch the video!


by ScegliAuto

More videos