Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Enfield Classic 350
Part: Clock

The adjustment of the clock on the Royal Enfield Classic 350 is done by turning on the instrument panel, inserting the ignition key into the corresponding slot: then you will need to turn it to turn on the panel. At this point, you can press repeatedly the button near the left handlebar grip to scroll through the menu: when the clock option appears, you can hold down the same button and the hours will start flashing. You can change them by repeatedly touching the same button, confirming by holding it down and then changing the minutes in the same way.

Posted on 12 October 2025 by ScegliAuto

Video tutorial

Related tutorials

How to set the time on the Royal Enfield Classic 350 Reborn?
How to set the time on the Royal Enfield Classic 350 Reborn?
Classic 350 In this tutorial, we can see how to adjust the time on the Royal Enfield Classic 350 Reborn, an extremely simple and quick operation to perform, for …
Where to Find the Fuses on a Royal Enfield Classic 350
Where to Find the Fuses on a Royal Enfield Classic 350
Classic 350 In this guide for Royal Enfield Classic 350 owners, we will discover where all the various fuses are located. First, ensure the motorcycle is complet…
How to Adjust the Clutch Cable on a Royal Enfield Classic 350
How to Adjust the Clutch Cable on a Royal Enfield Classic 350
Classic 350 Below are the instructions to adjust the clutch cable on a Royal Enfield Classic 350 motorcycle, as well as on the Bullet. First, place your motorcyc…

How to Check the Coolant Level in a Yamaha Xmax

In the following video, you will learn how to check the coolant level in a 2008 Yamaha Xmax. First, position the motorcycle on a stable surface by raising the stand. Next, lift the cover located at the top of the motorcycle to access the coolant drain bolt. To top up the coolant, unscrew the cap as shown in the video and add the fluid until it reaches the maximum level, indicated as Max. Once finished, close the valve and refit the cover. At this point, start the engine and let it run at idle for a few minutes to eliminate any air bubbles that may have formed inside.

Watch the video!


by ScegliAuto

More videos