Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Enfield Classic 350
Part: Clock

In this tutorial, we can see how to adjust the time on the Royal Enfield Classic 350 Reborn, an extremely simple and quick operation to perform, for example, after disconnecting the battery or following the switch to daylight saving time. First, we insert the key, then we turn on the instrument panel and access the clock using the "Info" button located on the left knob. Next, we hold down the same button until the clock starts flashing, we adjust the hour and switch to the minutes by holding it down again. In the same way, we can adjust the latter and save the setting.

Posted on 27 January 2026 by ScegliAuto

Video tutorial

Related tutorials

What does the wrench symbol indicate on the Royal Enfield Classic 350 Reborn and how to remove it?
What does the wrench symbol indicate on the Royal Enfield Classic 350 Reborn and how to remove it?
Classic 350 If the wrench symbol lights up in the instrument panel of our Royal Enfield Classic 350 Reborn, it means that it is time to perform the maintenance a…
Where to Find the Fuses on a Royal Enfield Classic 350
Where to Find the Fuses on a Royal Enfield Classic 350
Classic 350 In this guide for Royal Enfield Classic 350 owners, we will discover where all the various fuses are located. First, ensure the motorcycle is complet…
Removing the Rear Seat on a Royal Enfield Classic 350
Removing the Rear Seat on a Royal Enfield Classic 350
Classic 350 In today's guide video, you will see how to remove the rear seat of a Royal Enfield Classic 350; the process of removing the seat is quite simple and…

How to Replace the Front Headlight on the BMW F800GS

In this tutorial, you will see how to replace the front headlight on the BMW F800GS, an extremely simple and quick operation. First, ensure the key is not inserted for safety, then locate the power connector at the back of the headlamp and disconnect it by pressing the clip. Next, unscrew the two side bolts using a Torx T40 key, grasp the headlight and pull it away from the support. At this point, you can insert the replacement, tighten the two bolts, and reconnect the power connector.

Watch the video!


by ScegliAuto

More videos