Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

What does the spanner warning light mean on the Royal Enfield Classic 350 Reborn and how to reset it?

Model: Enfield Classic 350
Part: Key

Video tutorial

If the spanner warning light illuminates on the instrument panel of your Royal Enfield Classic 350 Reborn, it means it's time for a service as the interval has been exceeded. Once you have completed all the required scheduled maintenance tasks, you can manually reset the warning light by following the simple procedure shown in this tutorial.

First, insert the key, then turn on the ignition and hold down the top button on the left knob. Next, turn off the ignition and turn it back on while still holding the button, releasing it only once the warning light has disappeared from the display.


Updated on 20 October 2026 by ScegliAuto


Related tutorials

How to set the time on the Royal Enfield Classic 350 Reborn?
How to set the time on the Royal Enfield Classic 350 Reborn?
Classic 350 In this tutorial, we can see how to adjust the time on the Royal Enfield Classic 350 Reborn, an extremely simple and quick operation to perform, for …
Where to Find the Fuses on a Royal Enfield Classic 350
Where to Find the Fuses on a Royal Enfield Classic 350
Classic 350 In this guide for Royal Enfield Classic 350 owners, we will discover where all the various fuses are located. First, ensure the motorcycle is complet…
How to Reset the ECU on the Royal Enfield Classic 350?
How to Reset the ECU on the Royal Enfield Classic 350?
Classic 350 In this tutorial, you will see how to reset the ECU on the Royal Enfield Classic 350, a very simple and quick operation, for example, to clear a faul…

How to Replace the Battery in a Harley-Davidson Sportster Iron 883?

In this tutorial, you will see how to replace the battery in a Harley-Davidson Sportster Iron 883, a very simple and quick operation. Before proceeding, ensure that the key is not inserted for safety. Start by unscrewing the single bolt securing the seat, then remove the left plastic cover by unlocking the relevant clips. Next, remove the 3 fuses, disconnect the 2 terminals starting with the negative, and unscrew the bolt of the mounting bracket. At this point, you can extract the old battery, insert the replacement, and reassemble everything by following the reverse procedure.

Watch the video!


by ScegliAuto

More videos