Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
To change the engine oil of a Royal Enfield Himalayan, position the motorcycle on a flat surface and ensure that the engine is off and cold. Locate the oil drain plug, which is found under the engine, and prepare a container to collect the used oil. Use an appropriate wrench to unscrew the drain plug and let all the oil flow out. Once the oil is completely drained, replace the drain plug with a new gasket if necessary. Proceed to remove the oil filter and replace it with a new one, making sure to lightly lubricate the gasket before installation. At this point, fill the engine with the oil recommended in the owner's manual, using a funnel to avoid spills. Check the oil level using the dipstick or inspection window. After filling the engine, start the motorcycle for a few minutes, then turn it off and check the level again, adding more oil if necessary.

Posted on 10 December 2025 by ScegliAuto

Video tutorial

Related tutorials

Change the Engine Oil and Oil Filter on the Royal Enfield Himalayan
Change the Engine Oil and Oil Filter on the Royal Enfield Himalayan
Himalayan We will briefly discover the instructions that will allow us to change the engine oil and oil filter on the Royal Enfield Himalayan. First, place you…
How to Change the Engine Oil on a Royal Enfield Himalayan
How to Change the Engine Oil on a Royal Enfield Himalayan
Himalayan Changing the engine oil on a Royal Enfield Himalayan, as shown in this tutorial, is a straightforward and quick task. First, wait until the engine is…
How to change the engine oil of a Royal Enfield Himalayan?
How to change the engine oil of a Royal Enfield Himalayan?
Himalayan To change the motor oil of a Royal Enfield Himalayan, start by warming up the engine for a few minutes to thin out the oil. Turn off the engine and p…

How to Service the Piaggio Vespa GTS 300

This brief guide will illustrate the main steps to perform the routine maintenance service on the Piaggio Vespa GTS 300, replacing the engine oil and oil filter. First, place the scooter on the centre stand and start by unscrewing the oil drain bolt found under the engine, allowing it to drain into a container for about ten minutes; then unscrew the oil filter cartridge using the appropriate tool, and hand-tighten the new one. Finally, unscrew the filler cap and top up, filling to the maximum level mark!

Watch the video!


by ScegliAuto

More videos