Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Clutch on a Royal Enfield Classic 350

Model: Enfield Classic 350
Part: Clutch

Video tutorial

Today, we will discover the instructions that will allow us to remove and replace the clutch assembly of the Royal Enfield Classic 350 motorcycle. First, place the bike on a stand and begin draining the engine oil by unscrewing the drain bolt located under the engine; then remove the gear lever and unscrew the screws of the clutch cover to remove it as shown in the video.

At this point, unscrew the screws of the clutch pack, removing it and replacing each disc one by one; reassemble the clutch and cover, following the video tutorial to the end!


Posted on 14 April 2026 by ScegliAuto


Related tutorials

How to Replace the Clutch Cable on the Royal Enfield Classic 350
Classic 350 In this guide, you will learn how to remove and replace the clutch cable on the Royal Enfield Classic 350 motorcycle. First, place your bike on the c…
How to Replace the Clutch Discs on the Royal Enfield Classic 350
How to Replace the Clutch Discs on the Royal Enfield Classic 350
Classic 350 In this guide, we will discover the main steps to disassemble and replace the clutch discs on the Royal Enfield Classic 350. First, place the bike on…
How to Adjust the Clutch Cable on a Royal Enfield Classic 350
How to Adjust the Clutch Cable on a Royal Enfield Classic 350
Classic 350 Below are the instructions to adjust the clutch cable on a Royal Enfield Classic 350 motorcycle, as well as on the Bullet. First, place your motorcyc…

How to Replace the Clutch on a Kymco Downtown 125?

To replace the clutch on the Kymco Downtown 125, loosen the screws that secure the cover located on the left side of the bike, near the rear wheel. Once the screws are loosened, remove the cover to access the components underneath: the clutch at the rear can be removed by unscrewing the fixing screws and sliding out all the discs that make it up. At this point, insert the new replacement part, reposition the drive belt, and cover everything with the cover.

Watch the video!


by ScegliAuto

More videos